Godox X3 S – C -N Touchscreen TTL Wireless Flash Trigger for Sony,Canon ,Nikon
- Estimate Delivery : Dhaka inside 1-2 days outside 3-4 days
7,200.00৳
Guaranteed Safe Checkout
The Godox X3 TTL Touchscreen Wireless Flash Trigger is a next‑generation compact 2.4 GHz radio trigger for controlling Godox flashes remotely with TTL automation, High‑Speed Sync (HSS), and multi‑group management. It comes in dedicated versions for Sony (X3‑S), Canon (X3‑C), and Nikon (X3‑N) cameras, each tailored to the TTL protocol of its respective system while maintaining the same feature set otherwise.
Key Specifications
- Wireless System: Godox 2.4 GHz X radio
- Channels: 32
- Wireless Groups: 16 (A–F)
- Transmission Range: Up to ~100 m / 328 ft (line‑of‑sight)
- Control Modes: TTL, Manual, Multi (stroboscopic)
- TTL Protocol Support:
- Sony version (X3‑S): ADI / P‑TTL
- Canon version (X3‑C): E‑TTL / E‑TTL II
- Nikon version (X3‑N): i‑TTL
- High‑Speed Sync: Up to 1/8000 s
- Flash Exposure Compensation: ±3 EV in 1/3‑stop increments
- Front & Rear Curtain Sync: Supported
- TCM (TTL‑to‑Manual Conversion): Converts TTL result into equivalent Manual output
- Battery: Built‑in 3.7 V 850 mAh lithium battery (USB‑C rechargeable; ~2 h full charge)
- Display: Touchscreen with adjustable brightness
- Memory Function: Recalls last settings after restart
- Build: Locking hot shoe base mount
- Dimensions: Compact, lightweight design (~48 g)
Key Features
Touchscreen Interface
A touchscreen display offers intuitive navigation of flash power, TTL settings, groups, channels, and other features right from the trigger body without complex button menus.
Full Featured TTL Control
When paired with compatible Godox flashes, the X3 series supports full TTL automation, letting your camera and flash meter exposure for you, along with adjustable TTL flash exposure compensation.
High‑Speed Sync & Advanced Sync Options
Support for HSS up to 1/8000 s, front curtain sync, and rear curtain sync gives creative flexibility when shooting in bright conditions or capturing motion.
Wireless Multi‑Group for Complex Lighting
Manage multiple flash groups (up to 16) across channels to organize large lighting setups — ideal for studio or multi‑light on‑location work.
TCM Conversion
Godox’s TCM feature lets you convert a TTL‑calculated exposure into a manual power value, simplifying transitions between automatic and manual workflows.
Integrated Rechargeable Battery
The built‑in rechargeable battery powers the trigger for extended shooting sessions and is charged via USB‑C, eliminating the need for disposable cells.
Compact, Lightweight Build
Small form factor and light weight make the X3 trigger unobtrusive when mounted on camera — great for travel, run‑and‑gun, and everyday shooting.
What’s in the Box
- Godox X3 TTL Touchscreen Wireless Flash Trigger (Sony, Canon, or Nikon version)
- USB‑C Charging Cable
- Storage Bag
- Limited Warranty
You must be logged in to post a review.
Related Products
Godox AK-R1 Accessory Kit for Round Flash Head
- Attachment Type: Magnetic mount (tool-free, quick swap)
- What's Included:
- Snoot, four-way barndoors, honeycomb grid, near-180° dome diffuser, bounce card with frame, and a filter set (3 amber CT filters + 1 green fluorescent filter)
- Compatible With: Godox AD100Pro, AD200, AD200Pro, V1, V1 Pro round head flashes (when used with H200R head)
- Filter Size: 3 inches
- Carry Case: Included
Godox V850III Li-Ion Flash
The Godox V850III is the 2024/2025 refinement of the legendary V850 series. While it remains a strictly manual flash, it has been modernized with the same high-end build quality and battery system as the flagship Godox V1 and V860III.
| Feature | Specification |
| Guide Number | GN60 (ISO 100, 200mm) |
| Power Control | Manual Only (1/1 to 1/128 in 1/3 stop increments) |
| Recycle Time | 1.5 Seconds (at full power) |
| Battery | VB26/VB26A (Interchangeable with V1 & V860III) |
| Flash Capacity | 450 Full-power flashes per charge |
| Tilt Angle | -7° to 120° (Massive upgrade for bounce lighting) |
| Wireless | Built-in 2.4G Wireless X System (Transmitter & Receiver) |
Godox X2 2.4 GHz TTL Wireless Flash Trigger for Nikon
Key Specifications:
- Compatibility: Nikon i-TTL system
- Frequency: 2.4 GHz
- Groups / Channels / IDs: 5 groups, 32 channels, 99 ID settings
- Wireless Range: Up to 328 ft (100 m)
- High Speed Sync: Up to 1/8000 sec
- Ports: 3.5mm sync port + USB Type-C (for firmware updates)
- App Control: Bluetooth via the GodoxPhoto app (iOS & Android) — controls flash mode, power output, modeling light, and more
- Display: Backlit LCD with control dial, group buttons, and function buttons
- Flash Modes: TTL, Manual, Multi, Flash Exposure Compensation
Godox X2 2.4 GHz TTL Wireless Flash Trigger for Sony
The Godox X2T-S (the Sony-specific version of the X2 series) is the rugged, "workhorse" trigger of the Godox lineup. While the XPro series offers a larger screen and the X3 offers a touchscreen, the X2T-S remains the only trigger in the family that allows you to mount another accessory on top of it thanks to its integrated hot shoe.
| Feature | Specification |
| Compatibility | Sony Multi Interface (MI) Shoe (a7 IV, a6400, etc.) |
| Wireless | 2.4 GHz X-System (32 Channels / 99 IDs) |
| Sync Speed | High-Speed Sync (HSS) up to 1/8,000s |
| Bluetooth | Yes (Control via GodoxPhoto App) |
| Battery | 2 x AA Batteries |
| Interface | Backlit LCD with 5 Dedicated Group Buttons |
| Locking | Quick-release Hot Shoe Lock (Improved over X1T) |
RODE SC4 3.5mm TRS Female to 3.5mm Right-Angle TRRS Male Adapter Cable for Smartphones
The RØDE SC4 is a high-quality shielded adapter designed to bridge the gap between professional microphones and mobile devices. Specifically, it allows microphones with a 3.5mm TRS output (like the RØDE VideoMic or Wireless GO) to connect to the 3.5mm TRRS input found on most smartphones and tablets.
| Feature | Details |
| Input Connection | 3.5mm Female TRS (for the microphone) |
| Output Connection | 3.5mm Male TRRS (for the smartphone/tablet) |
| Connector Type | Gold-plated, Right-Angle (TRRS end) |
| Shielding | High-quality shielded construction to prevent interference |
| Signal Handling | Combines left and right stereo channels into a mono signal |
| Weight | 20 g (0.7 oz) |
| Length | Approx. 170 mm (6.7 inches) |
Ulanzi R094 Super Clamp
The Ulanzi R094 Super Clamp is one of those "essential problem-solvers" that every shop owner and content creator should have in their kit. It is a heavy-duty metal clamp combined with a 360° magic arm, allowing you to mount cameras, lights, or monitors to almost anything—tripod legs, table edges, or even overhead pipes in your shop.
For your website project, this is the perfect tool for overhead "flat lay" shots of your products or for clamping an RGB light (like your VL120) to a shelf to get the perfect luxury angle.
| Feature | Specification |
| Clamping Range | 13mm to 60mm (0.5 to 2.4 inches) |
| Load Capacity | 1.5kg (3.3 lbs) — Safe for small cameras, lights, and monitors |
| Mounting Points | 1/4" and 3/8" Threaded holes + 1/4" Screw on Ball Head |
| Material | High-grade Aluminum Alloy & Non-slip Rubber |
| Ball Head | Dual 360° Mini Ball Heads for total flexibility |
| Weight | 180g (Light but very strong) |
| Special Accessory | Includes a GoPro Adapter in the box |
Reviews
There are no reviews yet.