RODE NT-USB Mini USB Microphone
- Estimate Delivery : Dhaka inside 1-2 days outside 3-4 days
15,500.00৳
The RØDE NT-USB Mini is a compact, studio-quality USB microphone designed to bring the professional sound of RØDE’s larger condensers into a much smaller, more modern form factor. It is particularly well-known for its magnetic desk stand and its compatibility with the RØDE Connect software, which allows you to use up to four of these mics on a single computer.
| Feature | Details |
| Acoustic Principle | Pressure Gradient |
| Active Electronics | Electret Condenser, A/D and USB interface |
| Polar Pattern | Cardioid (Directional) |
| Frequency Range | 20 Hz – 20 kHz |
| A/D Resolution | 24-bit / 48 kHz |
| Maximum SPL | 121 dB (A-weighted) |
| Power Source | USB Bus Powered (5V) |
Guaranteed Safe Checkout
The RODE NT‑USB Mini is a compact, professional‑grade USB microphone designed for content creators who need clean, broadcast‑quality audio with a simple plug‑and‑play workflow. Built to deliver clear and natural sound, it’s ideal for podcasting, streaming, gaming, voice‑overs, online meetings, and more—without the complexity of mixers or audio interfaces.
Featuring a cardioid polar pattern, the NT‑USB Mini focuses on sound directly in front of the mic while minimizing background noise, resulting in clear vocal capture even in untreated rooms. Its integrated, detachable desk stand provides stable placement on any workspace, and the sleek all‑metal construction gives it a premium feel that’s built to last.
The microphone connects directly to your computer via USB‑C, delivering digital audio at up to 24‑bit / 48 kHz resolution. A built‑in zero‑latency headphone output lets you monitor your voice in real time with no audible delay, while the simple dial on the front gives direct control over headphone volume.
Compact, versatile, and easy to use, the NT‑USB Mini is a favorite for creators who want professional audio quality without unnecessary setup hassle.
Key Specifications
Microphone Type & Design
Form Factor: USB condenser mic
Polar Pattern: Cardioid (unidirectional)
Capsule Type: 14 mm condenser
Orientation: Side‑address design
Audio Performance
Frequency Response: 20 Hz – 20 kHz
Sample Rate: 48 kHz
Bit Depth: 24‑bit
Great vocal clarity and low self‑noise
Connectivity & Controls
Interface: USB‑C (plug‑and‑play)
Headphone Output: 3.5 mm jack (zero‑latency monitoring)
Headphone Volume Control: Front dial
Built‑in pop filter (internal)
Power
USB bus powered (no external power required)
Physical
Dimensions: Approx. 95 × 66 × 55 mm (mic body)
Weight: Approx. 326 g
All‑metal body with detachable desk stand
Compatibility
Plug‑and‑play with Windows, macOS, and many USB‑C devices (adapters may be required)
Works with streaming, recording, and communication apps
Included Accessories
Detachable desk stand
USB‑C to USB‑A cable
USB‑C to USB‑C cable
Ideal For
Podcasting & live streaming
YouTube and social content
Voice‑overs and narration
Gaming and online calls
You must be logged in to post a review.
Related Products
DJI Mic 2 2-Person Compact Digital Wireless Microp…e SystemRecorder for Camera & Smartphone (2.4 GHz)
The DJI Mic 2 (2 TX + 1 RX + Charging Case) is the gold standard for high-fidelity wireless audio, specifically designed for professional vloggers, interviewers, and filmmakers. Released in early 2024, it introduced 32-bit float internal recording and a sleek, transparent aesthetic that has become a staple in modern content creation.
| Feature | Details |
| Transmission Range | Up to 250 meters (820 ft) via 2.4GHz Digital |
| Internal Storage | 8GB per transmitter (Up to 14 hours of 24-bit/48kHz audio) |
| Recording Quality | 32-bit Float Internal Recording (Virtually impossible to clip) |
| Noise Cancellation | Intelligent Noise Cancelling for clear vocals |
| Battery Life | 6 Hours per component / 18 Hours total with Charging Case |
| Connectivity | USB-C, Lightning, 3.5mm TRS, and Bluetooth |
DJI Mic Mini Compact Wireless Microphone System for Camera & Smartphone (2.4 GHz) Single
| Feature | Details |
| System Type | 1 Transmitter (TX) + 1 Receiver (RX) |
| Weight | Transmitter: 10g (Approx. 0.35 oz) |
| Wireless Range | Up to 400 meters (Line-of-Sight) |
| Battery Life | 11.5 Hours (Transmitter) / 10.5 Hours (Receiver) |
| Audio Quality | 24-bit / 48kHz High-Fidelity |
| Noise Cancellation | 2-Level Active Noise Cancelling (Basic & Strong) |
| Connectivity | 3.5mm TRS, USB-C, Lightning, and Bluetooth 5.3 |
RODE SC4 3.5mm TRS Female to 3.5mm Right-Angle TRRS Male Adapter Cable for Smartphones
The RØDE SC4 is a high-quality shielded adapter designed to bridge the gap between professional microphones and mobile devices. Specifically, it allows microphones with a 3.5mm TRS output (like the RØDE VideoMic or Wireless GO) to connect to the 3.5mm TRRS input found on most smartphones and tablets.
| Feature | Details |
| Input Connection | 3.5mm Female TRS (for the microphone) |
| Output Connection | 3.5mm Male TRRS (for the smartphone/tablet) |
| Connector Type | Gold-plated, Right-Angle (TRRS end) |
| Shielding | High-quality shielded construction to prevent interference |
| Signal Handling | Combines left and right stereo channels into a mono signal |
| Weight | 20 g (0.7 oz) |
| Length | Approx. 170 mm (6.7 inches) |
RODE SC7 3.5mm Right-Angle TRS to 3.5mm Right-Angle TRRS Coiled Adapter Cable for Smartphone
The RØDE SC7 is a high-quality, shielded patch cable specifically designed to connect microphones with a TRS output (like the VideoMic GO, VideoMicro, or Wireless GO) to devices with a TRRS input (such as smartphones or tablets).
| Feature | Details |
| Output Type | 3.5mm TRS to 3.5mm TRRS |
| Connector 1 (TRS) | 3.5mm Male (Black Color, Right-Angle) |
| Connector 2 (TRRS) | 3.5mm Male (Grey Color, Right-Angle) |
| Cable Type | Coiled |
| Length | 170 mm (6.7") to 400 mm (15.7") |
| Contacts | Gold-plated for superior audio reproduction |
| Weight | 20 g |
RODE VideoMic GO II-H Ultracompact AnalogUSB Camera-Mount Shotgun Microphone
| Feature | Details |
| Acoustic Principle | Pressure gradient electret condenser |
| Polar Pattern | Supercardioid (Highly directional) |
| Frequency Range | 20 Hz – 20 kHz |
| Max SPL | 110 dB SPL |
| A/D Resolution | 24-bit / 48 kHz (In USB mode) |
| Equivalent Noise | 15 dBA |
| Weight | 33 g (Mic only) / 96 g (With mount & windscreen) |
RODE VideoMic Pro+ Camera-Mount Shotgun Microphone
| Feature | Details |
| Acoustic Principle | Line Gradient (Supercardioid) |
| Active Electronics | JFET impedance converter |
| Capsule | 0.55" (14 mm) |
| Frequency Range | 20 Hz – 20 kHz |
| Output Impedance | 200 $\Omega$ |
| Maximum SPL | 133 dB SPL |
| Sensitivity | -33.6 dB re 1 Volt/Pascal |
| Equivalent Noise | 14 dBA (A-weighted) |
Reviews
There are no reviews yet.